Smart Battery
Solutions
© Moltech Power
Systems
Smart Battery Auxiliary Power Packs
BC2D Range
Moltech Power Systems  
 
Moltech Power Systems - Powering Independence
   

With Intergrated Charger & Regulated DC Output
 
 
BC2Dxxyy Specifications
Weight (g)
270
Height (mm)
35.0
Length (mm)
200.0
Width (mm)
125.0
Mounting
25.4mm wide belt loop plus 4 "D" rings
Material
Padded, reinforced, rip-stop nylon
Cable
2 conductor, coiled cable. 150mm straight at either end with 300mm of coiled conductor. Extends to ~1500mm.
No DC connector fitted at the device end.
Fuel Gauge
4 LEDs in the DC:DC converter - visible through a clear window in the beltpack. The fuel gauge operates automatically during discharge.
Output Voltage
Available to order in the ranges 1V to 8V and 13V to 48V
Output Power
60 Watts maximum continuous drain
Combined wall mounted Mains plug & Power Supply
90-260VAC, 24V, 1.25A DC, Wall mounted PSU
UL listed, CE Compliant
BC2DxxyyA - 110V N. American 3-pin connector
BC2Dxxyyi - 110V N. American 3-pin connector + 220V European 2-pin connector + 240V UK 3-pin connector
Recommended Battery
NL2020HD22
RoHS Declaration
 
Description

The BC2D range of products consists of a soft padded nylon pouch with a smart charger, a DC to DC converter and fuel gauge indicator built into the battery connector.

These products are designed to work with the 10.8V, 95Wh NL2020HD22 high current discharge battery pack.

The regulated DC output is rated at 60Watts continuous up to 24V.

Solid inserts provide structure to the case and protection for the battery.

With the addition of a foam insert, the belt packs also accept the smaller NI2020HD 78Wh battery packs.

The required DC voltage must be specified prior to ordering the device.

If a DC connector is required to be fitted at the device-end of the cable, this must be specified prior to ordering, and may be subject to minimum order quantities.

Part Numbers: BC2Dxxyy

BC2D indicates a Belt Pack with 2 core cable and DC voltage regulation.

"XX" is used to indicate the required DC output voltage.

"YY" is used to indicate the DC connector fitted at the device end. The default value of "01" indicates an un-terminated cable.

"Z" is used to denote the mains power supply: "A" indicates a standard North American mains plug, "i" indicates the addition of an International kit of mains adaptors allowing operation in Europe and the UK.

Example: BC2D1901i is a Beltpack charger system with 2-conductor coil-cable, 19V regulated DC output and an International mains kit.

What's in the Box?

A padded ripstop-nylon beltpouch with a belt loop and 4 "D"rings for alternate mounting. The pouch also includes a window through which the battery fuel gauge can be viewed during operation.

A 2-conductor coil-cable terminated at the battery end with a combined battery charger, battery connector + DC:DC converter. The device end is left unterminated unless special-ordered.

A 30W mains wall mounted power supply with a N. American mains plug.

Interchangeable mains plug inserts for operation with European and UK mains (International versions only).

Typical uses include auxiliary power through the DC power jack for:

  • Pen tablet computers
  • Cycling and hiking lighting systems
  • Ruggedised computers
  • Military and commercial avionics
  • Industrial data loggers
  • Personal cooling / heating systems
  • Wearable computers
  • Industrial test & measurement systems
 
Smart Battery Accessories
 
Purchasing Information

You can purchase any of the Moltech Power Systems Standard Batteries & Accessories using your Mastercard or Visa card.

To purchase or for any additional information about the products please telephone +44 (0)1782 566688 or submit an enquiry.

 
   
Back to Standard Smart Battery Range
 


BC2D Auxiliary Power Pack